http://aprovecho.org/wp-content/uploads/2015/11/Aprovecho-Logo.png 0 0 Sam Bentson http://aprovecho.org/wp-content/uploads/2015/11/Aprovecho-Logo.png Sam Bentson2017-05-22 14:37:362017-05-22 14:37:36Clean Burning Biomass Cookstoves: A Quick Summary
Clean Burning Biomass Cookstoves: A Quick Summary
- The stove body and interior (including the combustion chamber) is low mass and insulative. The heat from the fire goes into the cooking process and is not diverted into the stove.
- The heat transfer efficiency is close to optimal resulting in over 40% thermal efficiency. One successful technique is to combine moderate firepower (2.5kW) with very small channel gaps (6mm) around the pot. Burning less wood results in fewer emissions.
- Emissions are reduced by increasing combustion efficiency. An appropriate amount of wood gas is made. The rate of reactions is controlled by adjusting the primary air or by metering the fuel.
- A zone of mixing of air, gases, smoke, and flame is created using jets of secondary air. The jets of secondary air can be powered by natural draft in a Top Lit Up Draft stove or by forced draft in both Rocket and TLUD stoves.
- Increasing the velocity of the jets of air can improve the effectiveness of the zone of mixing.
- The cooling effect of the secondary air jets is not allowed to decrease thermal efficiency below 40%.
- The amount of flame, air, and wood gas entering the zone of mixing is adjusted until close to optimal combustion efficiency is obtained.
- Emissions in the exhaust stream can be further reduced with a catalyst.
- Removing the emissions from the living space in a chimney is mandatory in the United States. The ARC stoves have chimneys to comply with new WHO guidelines.
- The prototype stove moves through an iterative development process by testing one change at a time under the emissions hood. The Water Boiling Test and the Controlled Cooking Test are both used to evolve a stove that is clean burning, fuel efficient, and cooks as well or better than the local model.
- The cooking function of the stove is designed by local users. The market viability of the product is determined by field testing involving stakeholders such as distributors, manufacturers, funders, consumers, etc. Market testing precedes and informs manufacturing.
- Reducing adverse health effects requires the new stove to be a successful intervention. The intervention involves many infield factors that influence the effectiveness of the whole package. Identifying these factors begins the process of creating the successful intervention.
- The stove is only one part of the successful intervention! A recent study in Malawi (commentary, article) of a clean burning stove found no decrease in PM exposure related illnesses, but less than 50% of the stoves were in use.
From “Clean Burning Biomass Cookstoves” found for free at aprovecho.org